Solutions through Science and Service​​​

  • Industrial and Commercial Chemical Analysis Laboratory
  • Applied Chemistry for Manufacturing Processes
  • You can find us on the plant floor and in the laboratory
  • Technical resource​ for engineers, plant management, and chemical product manufacturers
  • Specialized in Automotive, Aerospace, and Agricultural parts and equipment manufacturing
  • We provide answers and direction for unusual chemical challenges
  • We enable you to make decisions based on data.
  • Deposit and fluid Analysis
  • Process Improvement
  • Failure Analysis
  • Recycling Opportunities
  • Automation

Oakland Chemical

398 South St, Rochester, MI 48307

customer.service@oaklandchemical.com

(248) 535-2472

What We Do


We offer:

Lab analysis

Report generation

Alternative Solutions​

Recommendations for improvements

Cost Savings

Implementation plans and support

Training

Management

Root Cause Analysis

We enable you and your team to make decisions with data.​​

Free consultation and project evaluation.

We are also home to ChemCom, the worlds best coolant concentration controller. Please see us at:

www.chemcom.com

Technical Services

  • Deposit Analysis
  • Fluid Analysis
  • Root Cause Failure Analysis
  • Relative Lubricity Assessment 
  • Corrosion Testing
  • Water Treatment Testing and Analysis
  • Product Performance Evaluation
  • Cost Savings Identification
  • Training
  • Control Plan Development
  • Work Instruction Development
  • Sales Support
  • Metal Working Fluids
  • Metal Forming Fluids
  • Corrosion Inhibitors
  • Cleaners
  • Lubricants
  • Rust Preventatives
  • Water Treatment
  • More, please ask

Tools

  • Scanning Electron Microscope with X-ray detector (SEM-EDX)
  • Energy-dispersive X-ray Spectrometer (EDS)
  • Fourier Transform Spectrometer (FTIR)
  • Vis and Near-IR Spectrometer
  • Tapping Torque Testing Machine
  • 4-Ball Testing Machine
  • Draw Bead Simulator
  • Humidity Cabinet
  • Foam Testers
  • Test Spray and Ultrasonic Washers
  • Incubator
  • Microscopes
  • BOD and COD
  • Solids separation
  • Millipore testing
  • Additional equipment and labware
  • Fully stocked laboratory
  • More, please ask

Sticky buildup causing downtime on assembly equipment was identified and problem resolved

Tool changers on a transmission test stand were faulting due to an unknown, sticky contaminant residue. Oakland Chemical assisted in the tear-down and inspection of the spindles, took samples, and performed chemical analysis to identify the root cause. Oil incompatibility from an upstream operation was identified and assistance was given to select proper oil for that application.  Downtime was eliminated due to that cause.

Pitting on cylinder rods post nitride heat treatment was causing high scrap rates.

Severe, but sporadic pitting on polished cyclinder rods post nitride heat treatment was causing high scrap rates. The coolant being used in the upstream polishing process was being blamed. Oakland Chemical was commissioned to determine if this was the cause and if not, what was the root cause and suggest fixes. Samples were obtained and analyzed. It was determined the atmosphere on the furnace could be the root cause. After a seal replacement on the furnace the problem was resolved which eliminated the scrap from his cause. It wasn't the coolant after all.

Glazing in furnace was causing $millions of damage high scrap and early failure.

A glass-like deposit was forming inside a furnace leading to increased scrap rates and premature failure of the furnace. Oakland Chemical was commissioned to determine the root cause and suggest solutions to eliminate this problem. Onsite investigation was performed, samples taken, process evaluated, and laboratory analysis performed.

The root cause was determined to be from an improper curing an upstream boron based carburizing stop-off heat treatment. The process was evaluated and a short and long term solution was implemented.

Rust inside aerospace manufacturer's machines drove a project to replace coolant.

By reproducing the failure mode, it was determined that the incumbent coolant was not adequately protecting the machines. Oakland Chemical lead a project to find the best product for this application. A team was formed that included managers, engineers, union members, and operators. KPIs were identified, (both in the laboratory and on the plant floor), and testing completed.

By using data to select the right product and communicating properly, not only was the rust inside the machines eliminated, other improvements include residue reduction keeping machines clean, tool life improved, and recycling enabled. The result was improved up time, worker acceptance, and production rate improvements.

Contact Us

Please contact us for any questions or inquiries regarding our capabilities.

Oakland Chemical can help you to drive down costs and improve productivity.

PHONE

(248) 710-3264

LinkedIN

Mission Statement

Oakland Chemical strives to provide World Class Support to our business partners through Technical Expertise, Training, and Laboratory Analysis, leading to Root Cause Determinations and Solutions that will positively impact Safety, Cost, and Quality.   All aspects of Oakland Chemicals operations will be done with the mindset of Safety First,    for both Oakland Chemical and our Business Partners, as well as having a positive impact on the Environment.

©2017-2019 Oakland Chemical.